中国物性表查询网 >> PSU >> 美国苏威（聚醚砜）PSU P-1700 NT-11物性表

美国苏威（聚醚砜）PSU P-1700 NT-11物性表

分类: PSU 出处：仁捷塑化更新时间：2015-03-24 添加到收藏

聚砜Udel P-1700 NT-11产品说明:

美国苏威（聚醚砜）PSU塑料在中国大陆主要供应商为仁捷塑胶公司，财富热线：18681139818，QQ:13931677，联系人：唐生。

Udel® P-1700 polysulfones are tough, high-strength thermoplastics that are suitable for continuous use up to 300°F (149°C).

Udel Film is resistant to oxidation and hydrolysis and withstand prolonged exposure to high temperatures and repeated sterilization. Udel® P-1700 polysulfone films are highly resistant to mineral acids, alkali and salt solutions.

Their resistance to detergents and hydrocarbon oils is good, but they will be attacked by polar solvents such as ketones, chlorinated hydrocarbons, and aromatic hydrocarbons. Electrical properties of Udel® PSU films are stable over a wide temperature range and after immersion in water or exposure to high humidity. The film is transparent, a light yellow color.

美国苏威（聚醚砜）PSU P-1700 NT-11物性数据：

特性

电子束消毒

高强度

好的消毒性

抗伽马辐射

抗氧化

耐碱

耐热性，高

耐水解性

耐酸

韧性良好

食品接触的合规性

用途

电池

电气/电子应用领域

电气元件

家电部件

汽车电子

食品服务领域

机构评级

FDA 21 CFR 177.1655

NSF 未评级

RoHS 合规性

RoHS 合规

外观

琥珀色

自然色

物理性能	额定值	单位制	测试方法
比重	1.24	g/cm³	ASTM D792
吸水率 (24 hr)	0.30	%	ASTM D570

机械性能	额定值	单位制	测试方法
撕裂阻力	945	J/cm	ASTM D1004
薄膜	额定值	单位制	测试方法
薄膜厚度 - 经测试	30	µm
割线模量			ASTM D882
MD	2300	MPa
TD	2370	MPa
抗张强度			ASTM D882
MD : 屈服	68.0	MPa
TD : 屈服	63.7	MPa
MD : 断裂	58.3	MPa
TD : 断裂	56.8	MPa
伸长率			ASTM D882
MD : 屈服	5.5	%
TD : 屈服	5.1	%
MD : 断裂	53	%
TD : 断裂	35	%
落锤冲击	400	g	ASTM D1709
面积系数	158	ft²/lb/mil

热性能	额定值	单位制	测试方法
载荷下热变形温度 (1.8 MPa, 未退火)	174	°C	ASTM D648
线形热膨胀系数 - 流动	5.6E-5	cm/cm/°C	ASTM D696

电气性能	额定值	单位制	测试方法
体积电阻率	3.0E+16	ohm·cm	ASTM D257
介电强度	130	kV/mm	ASTM D149
介电常数 (1 kHz)	3.04		ASTM D150
耗散因数 (1 MHz)	6.0E-3		ASTM D150
可燃性	额定值	单位制	测试方法
极限氧指数	26	%	ASTM D2863

补充信息
Standard Thicknesses and Widths Widths are available from 22" (559 mm) to 56" (1422 mm). Products with widths <22 inches or >56 inches are available upon request. Tolerances for widths are +/- 4mm. For PSU film, the standard thicknesses are 25 microns (1 mil) to 1016 microns (40 mil). Surface Finishes Standard surface finish is P/M (polished / matte). Custom finishes of P/P (polished / polished) and M/M (matte / matte) are available. Packaging Film is supplied in a roll form of high quality, cardboard core of 3" (76mm) or 6" (152mm). PVC cores are available upon request in 3" and 6" sizes. Labeling Products are labeled to comply with national and international standards. Labels include product grade, unique batch number, roll length, roll width, product thickness, and net weight.