Eastman CAB 381-2BPApplication/Uses
Automotive OEM
Coatings
Coatings for Automotive Plastics
Coatings for plastic
Heat seal adhesive
Lacquers for automotive
仁捷塑胶有料有限公司是美国伊士曼CAB代理商之一，CAB销售热线：18681139818 联系人：唐生 QQ:13931677。
Lacquers for paper
Lacquers for plastic
Lacquers for wood
Truck/Bus/Commercial Vehicles
伊士曼CAB 381-2BPProduct Description
Remarkable polymers with a renewable backbone provided by nature itself.
Eastman™ Cellulose Acetate Butyrate BP (CAB-381-2BP) grade ester is a slight modification of the standard CAB-381-2 cellulose acetate butyrate and has a lower viscosity. The BP grade was designed primarily to meet the needs of European formulators. Eastman™ cellulose esters are based on up to sixty percent cellulose, one of the most abundant natural renewable resources.
Eastman CAB 381-2BPTypical Properties
| Property | Typical Value, Units | |||
| Butyryl Content | 36 wt % | |||
| Acetyl Content | 14.5 wt % | |||
| Hydroxyl Content | 1.7% | |||
| Color a | 87 ppm | |||
| Haze a CAB销售热线：18681139818 | 20 ppm | |||
| Acidity as Acetic Acid | <0.03 wt % | |||
| Moisture Content | <3 wt % | |||
| Ash Content | 0.05% | |||
| Refractive Index | 1.475 | |||
| Heat Test @ 160°C for 8 hr | Tan melt | |||
| Melting Point | 175-185°C | |||
| Specific Gravity | 1.2 | |||
| Wt/Vol (Cast Film) | 1.2 kg/L (10.0 lb/gal) | |||
| Bulk Density | ||||
|
416 kg/m3 (26 lb/ft3 ) | |||
|
480 kg/m3 (30 lb/ft3 ) | |||
| Dielectric Strength | 787-984 kv/cm (2-2.5 kv/mil) | |||
| Glass Transition Temperature (Tg) | 130°C | |||
| Molecular Weight b Mn | 66000 | |||
| Tukon Hardness | 18 Knoops | |||
| Viscosity c | 8.41 poise | |||
| a Determination of color and haze is made on CAB solution using Pt-Co color standards (color) and a monodisperse latex suspension (haze). Analysis is performed with a Gardner Model XL-835 colorimeter. b Polystyrene equivalent number average molecular weight determined by gel permeation chromatography. c Viscosity determined by ASTM Method D 1343. Results converted to poises (ASTM Method D 1343) using the solution density for Formula A as stated in ASTM Method D 817 (20% Cellulose ester, 72% acetone, 8% ethyl alcohol). |
||||
| Comments Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given. |
||||
亲，如果要PDF物性表，可以到物性下载栏目下载，或发邮件到：tjh@rjplastics.com索取！
温馨提示：仁捷公司免费24小时提供塑胶原料注塑成型技术支持,咨询热线：18681139818，联系人：唐生
Tag: 伊士曼CAB ,CAB物性表 ,Eastman ,CAB代理商
