This product is classified as an amorphous thermoplastic blend of ABS and Polycarbonat

e. This product is known for high impact and notched impact strength, stiffness, heat res

istance, dimensional accuracy, low shrinkage, low warp, and light stability. This product is

available in:

• Non-reinforced general purpose

• Non-reinforced flame retardant

• Glass fiber reinforced

• Acrylic co-extruded cap

Applications:
Some ideal application for Prime PC/ABS include the following:

• Engine covers

• Fan shrouds

• Structural parts

• Motorcycle fairings

Processing:
Forming temp. is 400°F, tool temperature is 150-200°F. The part can be de-molded at 20

°F. Sheet should be dried before forming @ 180°F for 2-4 hrs.

Finishing:
Cutting or machining of this product may be done by sawing, drilling, grinding, sanding,

punching and die cutting. High pressure and laser cutting will also work for this product.

Prime PC/ABS may be bonded with chemical, mechanical screws and other type of fasten

ers as well as sonic welding.

Please contact your Primex Plastics representative for more information on finishing, fabri

cating, or the thermoforming process.

Colors, Textures and Capabilities:
PC/ABS can be color matched to suit your needs. Several textures are available including, H

/C, FL/HC, Calf Grain and more. Sheet thickness can range from .090-.400 and in widths of u

p to 120".

基本信息
特性	超声波可焊接 尺寸稳定性良好 低翘曲性 刚性，高 光稳定 抗撞击性，高 可切削 可粘结性 耐热性，高 收缩性低 无定形的
用途	电器外壳 构件 汽车的发动机罩下的零件
外观	可用颜色
形式	片材
加工方法	热成型

物理性能	额定值	单位制	测试方法
比重	1.22	g/cm³	ASTM D792
吸水率 (23°C, 24 hr)	0.10	%	ASTM D570

机械性能	额定值	单位制	测试方法
拉伸模量	3300	MPa	ASTM D638
抗张强度			ASTM D638
屈服	55.8	MPa	ASTM D638
断裂	60.0	MPa	ASTM D638
弯曲模量	2990	MPa	ASTM D790

冲击性能	额定值	单位制	测试方法
悬壁梁缺口冲击强度 (23°C)	430	J/m	ASTM D256

热性能	额定值	单位制	测试方法
载荷下热变形温度			ASTM D648
0.45 MPa, 未退火	138	°C	ASTM D648
1.8 MPa, 未退火	126	°C	ASTM D648
维卡软化温度	118	°C	ASTM D1525
线形热膨胀系数 - 流动	6.6E-5	cm/cm/°C	ASTM E831

补充信息	额定值	单位制
De-mold Temperature	93	°C
Tool Temperature	66 到 93	°C
成型温度	204	°C
干燥温度 1	82	°C