中国塑料物性表查询网|国内最好的物性表查询网! 财富热线:18681139818   QQ:13931677   Email:tjh@rjplastics.com
北化院PBT
 中国物性表查询网 >> PTFE >> 日本大金铁氟龙(聚四氟乙烯)M-15X物性表

日本大金铁氟龙(聚四氟乙烯)M-15X物性表

分类: PTFE   出处:仁捷塑化  更新时间:2015-03-09   添加到收藏  

 聚四氟乙烯 M-15X产品说明:

DAIKIN AMERICA, INC.
 
Daikin PTFE (polytetrafluoroethylene) molding powders are excellent, fine cut resins, well suited for a variety of demanding chemical, mechanical, electrical and non-stick surface applications. These PTFE resins are fully fluorinated and have the best thermal, electrical, and chemical properties of all fluoropolymers with a continuous service rating of 500°F (260°C). Daikin PTFE molding powders are available in homopolymer and modified fine cut grades.
 
Daikin PTFE molding powders can be used continuously at temperatures up to 260°C (500°F) and for short periods of time at higher temperatures. They also possess excellent low temperature strength.
 
Daikin PTFE molding powders are completely inert to attack by all chemicals except hightemperature, high-pressure elemental fluorine gas, molten alkaline metals and chlorine trifluoride.
 
The non-polar molecular structure makes Daikin PTFE molding powders ideal for use as high-frequency insulating material. The dielectric constant and dissipation factor are uniformly low over a wide frequency range.
 
Under ordinary conditions of use, Daikin PTFE molding powders possess the lowest coefficient of friction of any solid material. Also, the non-stick properties of these products prevent most materials from adhering to them.
 
Chemical/Mechanical—Packings, gaskets, diaphragms, bellows, corrosion-resistant linings, piping components, pump parts, O-rings, V-rings, bushings, slide bearings, etc.
 
Electrical/Other—Insulating skived tape, insulating sleeves, terminals, connectors, sockets, spacers, electronic parts, laboratory equipment, etc.

日本大金铁氟龙(聚四氟乙烯) PTFE M-15X物性数据

日本大金铁氟龙(聚四氟乙烯 PTFE)原料在中国大陆主要供应商为仁捷塑胶公司,财富热线:18681139818,QQ:13931677,联系人:唐生。

填料/增强材料 
  • 填料
特性 
  • 低摩擦系数
  • 低温强度
  • 高分子量
  • 均聚物
  • 耐化学性良好
  • 无粘性
  • 粘度,高
用途 
  • 包装
  • 泵件
  • 衬里
  • 衬套
  • 带子
  • 电气元件
  • 垫圈
  • 隔膜
  • 管道系统
  • 绝缘屏蔽
  • 连接器
  • 实验室器具
  • 轴承
机构评级 
  • FDA 21 CFR 177.1550
形式 
  • 粉状
加工方法 
  • 烧结
  • 压缩模塑
 
物理性能
额定值
单位制
测试方法
比重
2.16
g/cm³
ASTM D4894
表观密度
0.46
g/cm³
ASTM D4894
收缩率 - 流动
4.4
%
内部方法
机械性能
额定值
单位制
测试方法
抗张强度 (屈服, 1.50 mm)
> 43.0
MPa
ASTM D4894
伸长率 (断裂, 1.50 mm)
> 400
%
ASTM D4894
压缩强度
    ASTM D695
0% 应变 2
7.80
MPa
 
1% 应变 3
5.00
MPa
 
25% 应变 3
28.1
MPa
 
负载变形
    ASTM D621
25°C, 14 MPa
17.2
%
 
100°C, 14 MPa
33.3
%
 
200°C, 6.9 MPa
27.0
%
 
弹性体
额定值
单位制
测试方法
压缩永久变形
    ASTM D621
25°C 4
8.6
%
 
100°C 4
20
%
 
200°C 5
16
%
 
热性能
额定值
单位制
测试方法
连续使用温度
260
°C
 
熔融温度
327
°C
DSC
电气性能
额定值
单位制
测试方法
表面电阻率
> 1.0E+15
ohm
ASTM D257
体积电阻率
> 1.0E+18
ohm·cm
ASTM D257
介电强度
100
kV/mm
 
介电常数 (1 kHz)
< 2.10
 
ASTM D150
耗散因数 (1 kHz)
< 1.0E-4
 
ASTM D150
补充信息
额定值
单位制
测试方法
MIT Flexural Life
5.00E+6
 
ASTM D2178
Stretching Void Index
300
 
ASTM D4895
击穿电压 (100.0 µm)
10
kV/mm
 
For more information see the Brochure
备注
1通过这些链接您能够访问供应商资料。我们尽量保证及时更新资料;不过您可以从供应商处了解最新资料。
2off set, 10x20 mm sample
310x20 mm sample
413.7 MPa
56.9 MPa

亲,如果要PDF物性表,可以到物性下载栏目下载,或发邮件到:tjh@rjplastics.com索取!
温馨提示:仁捷公司免费24小时提供塑胶原料注塑成型技术支持,咨询热线:18681139818,联系人:唐生
Tag: 铁氟龙 ,聚四氟乙烯 ,日本大金铁氟龙 ,PTFE